RECONDITIONING SERVICES

  • IRRA Reconditioning Services
    • PS-4002B
      1. Disassemble the motor
        Ultrasonic clean / rinse and dry
        Inspect the setup for defects and needed adjustments
        Test to see if the magnets are properly glued in / re-glue as needed
        Zap the setup
        Drill endbell holes if needed and install new screws
        Align the brush hoods
        Recondition the armature (cut comm and balance)
        Reassemble the motor and insert can screws if needed
        Radius new ProSlot Gold Dust premium motor brushes
        Install new ProSlot / OEM springs
        Attach motor seal
        Break-in motor
        No extra charge for wears parts
        Cost $18
    • PS-4002B-B
      1. Same as PS-4002B
        Install new Bearing or replace Bushing with Bearing
        Cost $21
    • Return by U.S. first class mail. 4 or more motors returned by U.S. Priority mail You can pay extra for priority mail with 1 or 2 motors. Payment can be personal check, postal money order, credit card or Pay Pal.
    • Please include your full address, daytime phone number, email address and payment or payment info. And send to:
        687 Lincoln Lake Ave S.E.
        Lowell, MI. 49331-9416
        616-897-6000 [email protected]
  • Pro Slot is expanding our motor rebuilding program to include these Motors.
    • PS-725 Dragmaster SPEC motor………………………$18.00 Includes: Ultra sonic cleaning, re-zapping magnets, recondition armature, New Goldust brushes & springs, new can bushing if needed and reseal the motor.
      • Additional parts extra:
      • New armature……………$18.00
      • New Endbell……………....$5.50
    • PS-748-12, PS-748-20 & PS-733 DragMaster Motors…$18.00 Includes: Ultra sonic cleaning, re-zapping magnets, recondition armature, New Goldust brushes, springs, shunt wire & new bushings if needed.
      • Additional parts extra:
      • New X-12 or G20 armature……………$24.00
      • New Topgun armature…………………$35.00
      • New MegaMaster armature……………$33.00
      • New Endbell……………….…………....$6.50
      • New Ball Bearings………………………$7.00 each
    • All other Pro Slot C-can & D-can Motors...$18.00 Includes: Ultra sonic cleaning, re-zapping magnets, recondition armature, new Goldust brushes, springs & new bushing if needed.
      • Additional parts extra:
      • New Endbell……………................$6.50
      • New Ball Bearings…………………$3.50 each
    • Pro Slot VR Neo Motors...$18.00 Includes: Ultra sonic cleaning, recondition armature, new Goldust brushes, springs & new bushings if needed.
      • Additional parts extra:
      • New Endbell……………................$5.00
      • New Ball Bearings…………………$3.50 each
  • General Reconditioning Services
    • We race condition any brand armature with the same quality service. Every armature is ultrasoncially cleaned, diamond trued, and precision rebalanced. We will take the lightest cut possible to true your commutator and we recalibrate our machine for each armature. All orders with 8 or more armatures are returned by U.S. Priority Mail (usually delivered within 3 days). Orders with less than 8 armatures are returned by First Class Mail. For faster return, enclose the proper amount for Overnight Shipping. We accept Visa or MasterCard for our reconditoning services. Include your name as it appears on the card, credit card number, expiration date, phone number, billing address and shipping address. Your receipt will be sent back with your armatures.
      • Armature Reconditioning $4.50 - When sending 6 to 10 armatures $4.00 - Full Standard discount to commercial raceways for 10 or more armatures
      • Engraving $.50 - Grind Stacks up to .010 reduction $1.00
      • Grind Stacks greater than .010 reduction $2.00
      • Remagnetize Ceramic magnets in or out of the can, including R/C Magnets $1.25
      • ADDITIONAL SERVICES
      • Resistance and Induction readings done on each armature and marked on the tubes $1.50
    • Note: Please order our parts from your local raceway

 

CATALOG SEARCH